This can be done by simply changing the line:. The first thing you should know is that CD drivers come in pairs: First of all, check whether the DOS drivers are loading before Windows. BAT file and adds it to a file called C: Be especially careful not to confuse 0 ‘s with O ‘s; a lot of people trip up on that! Below are examples of the format of how the drivers should be loaded in your autoexec.
|Date Added:||19 October 2016|
|File Size:||8.63 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
If they both are, make a note of which drive letter is assigned to the CD typically D: MSCD is not a driver; it is a common name of the driver. What this means is once the driver loads successfully, it will name the driver; so when MSCDEX is loading, it will look for MSCD or 0010 name of the driver instead of attempting to guess. The first thing you should know is that CD drivers come in pairs: Second, if the high memory managers are being loaded, ensure that you have enough memory to load these devices into the high memory portion of your memory.
This can be done by simply changing the line:.
MSCD | Touhou Denpatou – VGMdb
You will have to read your CD documentation to find out the exact name and syntax, but the line that loads this driver is almost always found in the file C: The vendor-specific driver can take on many forms. Below are examples of the format of how the drivers should be loaded in your autoexec.
If you aren’t using the DOS drivers and you can’t get the Windows 95 drivers to work, you may have to install the DOS drivers at least temporarily until you can get Windows straightened out. If your CD drive is not listed in Device Manager, check to see if your controller is working properly. Be especially careful not to confuse 0 ‘s with O ‘s; a lot of people trip up on that!
CD-ROM driver help
If it is, double-click on it, click on 00001 Settings tab, and check the drive letters. These are files used with earlier versions of Windows Windows 95 and Windows 3. Introduction Examples Common mistakes Common questions Autoexec.
Note the difference between a drive and a driv er: Just make both the start and end letters the same. Some typical examples mscs. BAT file and adds it to a file called C: If you paid really close attention, you may have noticed that all these lines have one thing in common: Click here to send me e-mail!
For users of Windows 95, the issue of drivers is a little more detailed, but really no more difficult. CD-ROM drivers are the most msccd, and lately I’ve been reminded that they can be a source of confusion for many people.
CD-ROM driver help
Ensure that you only have one line loading. While these lines may be loading properly, it could be a possibility that your CD-ROM is not working because of a hardware issue with the drive itself.
First of all, check whether the DOS drivers are loading before Windows.
Mscr should receive a memory error message if not enough memory is available. Was this page useful? If you’re running Windows 95 or later get your drivers’ from our disc drivers section. Below is a listing of the major disc drive manufacturers and their related driver files.
Again, the exact line for your system may vary, but it will look something like this:.
If there is a space in the line, the computer will not load this line. First of all, if you’re going to be using the CD-ROM in programs that run in DOS Mode, everything in the above section still applies to you with the following exceptions. Although the above examples are not used with all computers autoexec.
EXE has moved to a different directory:.