The Settings dialog box displays: On the print server, select the printer driver called S Make sure Canon S is displayed as the default printer. The icon to the left of the printer name shows the printer status. The Photo Optimizer feature works on the image that is edited using the edit menu such as Cut and Rotate in a graphics application program. To change the value of the enlargement or reduction ratio, click the up- or down-arrow to the right of the Scaling box.
|Date Added:||26 May 2009|
|File Size:||10.63 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Consumables for CANON BJ s – Ink cartridge, MICR, ribbons, printer toner – Saver
Printable Area width height Page If the cleaning had no effect, perform normal print head cleaning and deep Note print head cleaning again. Close Click in the Close box to close the Chooser.
Customizing the Scanning Settings When you select Custom for Scanning Mode in the Settings dialog box, you can specify the scanning settings. The operation is the same when any other function is selected. Use the BCe with the BCe color cartridge for black and color printing. Last Only the function applied immediately before is acnon.
Canon originál ink BCI3eBK, black, 500str., 4479A002, Canon BJ-C6000, 6100, S400, 450, C100, MP700
Printing a Stamp The printer driver allows you to print a stamp on your documents. Using the Customized Scanning Mode When you select Custom in the Scanning Mode box of the main dialog box, the Canob dialog box opens and allows you to adjust the scanning settings for special scanning jobs.
You can print on up to six sheets. Canpn print mode display varies with the position of the slide bar. When the white calibration sheet is ejected from the paper output tray, White Level Calibration processing is complete.
Set the desired enlargement or reduction ratio z400 the Scaling box. Printing on Special Media Types Place one sheet of plain paper behind one magnet sheet. Do not touch the metal contacts on a BJ cartridge after printing.
Execute normal print head cleaning Nozzle check pattern poor quality? Page 61 Load the Glossy Photo Card: Do not attempt to reattach a protective cap to a BJ tank.
ink cartridges CANON BJ s400
The following topics regarding BJ cartridge maintenance describe how to check the status of the BJ cartridges and take the appropriate actions to correct problems.
Macintosh When using Manual for printing, click the Details button in the Printer Properties dialog box. Disconnect the printer cable from your computer and printer, and disconnect the power cord from the printer. Page Select the most appropriate icon in the Scanning Mode box of the Capture Image screen according to your scanning purpose.
Click the Select Background button. Normally, you will select this setting. Text cut off at bottom right corner, right edge, or bottom edge The text is printing in the bottom right corner of the page or printing beyond the right or bottom margins and cut off from view.
UKT Support – Canon S
You can also smooth the appearance of the image and invert the image. Discard the protective cap and tape immediately. Printing on Banner Paper Bh section describes the print settings for printing on banner paper. Click Start, Settings, and then Printers. Last part of print job not printing The last part of each page in the document is not printed.
Remove the BJ cartridge and check the print head.
Use the Photo Optimizer to compensate for unsatisfactory color balance and d400 or under-exposure before printing. Cleaning the Print Head If patterns 2 are not overlapped perfectly, print head alignment is required.
For details on how to load banner paper in the printer, refer to the Paper Handling section. Cancel spooling and send the print job directly to the printer. Touching the print head could damage it and make further printing impossible.