Laser Safety The laser diode and the scanning polygon mirror are incorporated in the print head unit. Page 49 Basic Operations Close the 1st Tray. Components And Their Functions Lower Copy Tray Collects copies. When checking for uneven 2 density or uneven pitch?

Uploader: Grole
Date Added: 25 January 2006
File Size: 65.13 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 32108
Price: Free* [*Free Regsitration Required]

The Service mode menu screen will appear. Automatically Selecting The Paper Source YES Replace the clutch. A risk of fire exists.

If the power plug, cord, or sheath is damaged, replace with a new power cord with plug and connector on each end specified by Develop. Be careful not to touch IC directly with bare hands. Remove the Fax board.

Using a soft cloth dampened with alcohol, wipe the roll. Press the following keys in this order: When “1” or “2” is selected, a screen will then appear to allow the counter value to be entered. Load the Paper Feed Unit with A4 crosswise paper. Pass the cable from pulley B into the hole in the Develip frame.


The mode when the IU life is reached, is specified by this setting. Remove the Separator Roller. Decreased copy quality may result if the surface of the image transfer roller is touched.

Windows 10 – DEVELOP | Europe

Unplug one connector from the Control Board. Using a soft cloth dampened with alcohol, wipe the Lens clean of dirt. Remove one screw from the rear cable pulley.

Press the Utility key.

OS Compatibility

After the document page is scanned, a double-sided copy is printed. Remove four screws and the Fusing Unit. Basic Operations Advanced Copy Operations p.

Outline o A paper misfeed is detected by detecting different states of signals H, L of several sensors located near the paper take-up section and the Exit Paper Sensor. Remove the cable from the cable pulley. Remove two screws and the Separator Section Protective Cover.

Is a foreign object present along the paper Clean the paper path and replace if necespath, or is the paper path deformed or worn? Refer to the option service manual PF for details.


Aligning protrusion B of the torque deevelop with any one of the three slits in the collar, fit the collar to the torque limiter. develoo

YES o Remove foreign matter. Remove one screw, unplug one connector, and remove the Total Counter. Enter text from picture: Comments to this Manuals Your Name.

Technical Details

The “Found New Hardware Wizard” dialog box will appear again: Unplug all connectors from the Interface Board. Remove the harness from the two wiring saddles. Remove the Paper Take-up Roller lock.

At setup stops as soon as the adjustment is made.